 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| the mark data sheet pn10260ej06v0ds 2 PS8101 package dimensions (unit: mm) 1.27 0.4 +0.10 ?0.05 0.25 m 0.10.1 2.60.2 4.4 7.00.3 0.50.3 0.15 +0.10 ?0.05 3.4 +0.3 ?0.1 53 12 4 marking example no. 1 pin mark rank code year assembled (last 1 digit) week assembled n 9 31 8101 n931 *1 *1 bar : pb-free type number assembly lot no. 1 pin mark rank code year assembled (last 1 digit) week assembled n 9 31 8101 n931 *1 *1 bar : pb-free type number assembly lot snbi plating ni/pd/au plating photocoupler construction parameter PS8101 air distance (min.) 4.2 mm outer creepage distance (min.) 4.2 mm isolation distance (min.) 0.2 mm data sheet pn10260ej06v0ds 3 PS8101 ordering information part number order number solder plating specification packing style safety standard approval application part number *1 PS8101 PS8101-a pb-free 20 pcs (tape 20 pcs cut) standard products PS8101 PS8101-f3 PS8101-f3-a (snbi) embossed t ape 2 500 pcs/reel (ul, csa approved) PS8101-f4 PS8101-f4-a PS8101-v PS8101-v-a 20 pcs (tape 20 pcs cut) din en60747-5-2 PS8101-v-f3 PS8101-v-f3-a embossed tape 2 500 pcs/reel (vde0884 part2) PS8101-v-f4 PS8101-v-f4-a approved (option) PS8101 PS8101-ax pb-free 20 pcs (tape 20 pcs cut) standard products PS8101-f3 PS8101-f3-ax (ni/pd/au) embossed tape 2 500 pcs/reel (ul, csa approved) PS8101-f4 PS8101-f4-ax PS8101-v PS8101-v-ax 20 pcs (tape 20 pcs cut) din en60747-5-2 PS8101-v-f3 PS8101-v-f3-ax embossed t ape 2 500 pcs/reel (vde0884 part2) PS8101-v-f4 PS8101-v-f4-ax approved (option) *1 f or the application of the safety st andard, following part number should be used. absolute maximum ratings (t a = 25c, unless otherwise specified) parameter symbol ratings unit diode forward current i f 25 ma reverse voltage v r 5.0 v pow er dissipation *1 p d 45 mw detector supply voltage v cc 35 v output voltage v o 35 v output current i o 8.0 ma pow er dissipation *2 p c 100 mw isolation voltage *3 bv 3 750 vr.m.s. operating ambient temperature t a ?55 to +100 c storage temperature t stg ?55 to +125 c *1 reduced to 0.45 mw / c at t a = 25 c or more. *2 reduced to 1.00 mw/ c at t a = 25 c or more. *3 ac voltage for 1 minute at t a = 25c, rh = 60% between input and output. pins 1-2 shorted together , 3-5 shorted together. data sheet pn10260ej06v0ds 4 PS8101 electrical characteristics (t a = 25c) parameter symbol conditions min. typ. max. unit diode forward voltage v f i f = 16 ma 1.7 2.2 v reverse current i r v r = 3 v 10 a forw ard voltage temperature coefficient ? v f / ? t a i f = 16 ma ? 2.1 mv/ c terminal capacitance c t v = 0 v, f = 1 mhz 30 pf detector high level output current i oh (1) i f = 0 ma, v cc = v o = 5.5 v 3 500 na high level output current i oh (2) i f = 0 ma, v cc = v o = 30 v 100 a low level output voltage v ol i f = 16 ma, v cc = 4.5 v, i o = 1.2 ma 0.1 0.4 v low level supply current i ccl i f = 16 ma, v o = open, v cc = 30 v 50 a high level supply current i cch i f = 0 ma, v o = open, v cc = 30 v 0.01 2 coupled current transfer ratio *1 ctr i f = 16 ma, v cc = 4.5 v, v o = 0.4 v 15 20 35 % isolation resistance r i-o v i-o = 1 kv dc , rh = 40 to 60% 10 11 ? isolation capacitance c i-o v = 0 v, f = 1 mhz 0.4 pf propagation delay time (h l) *2 t phl i f = 16 ma, v cc = 5 v, r l = 2.2 k ? , c l = 15 pf 0.5 0.8 s propagation delay time (l h) *2 t plh 0.6 1.2 common mode transient immunity at high level output *3 c mh i f = 0 ma, v cc = 5 v, r l = 4.1 k ? , v cm = 1.5 kv 15 kv/ s common mode transient immunity at low level output *3 c ml i f = 16 ma, v cc = 5 v, r l = 4.1 k ? , v cm = 1.5 kv ? 15 *1 ct r rank k : 20 to 35 (%) n : 15 to 35 (%) data sheet pn10260ej06v0ds 5 PS8101 *2 test circuit for propagation delay time pulse input 47 ? (pulse width = 100 s, duty cycle = 1/10) r l = 2.2 k? v o (monitor) v cc = 5 v input (monitor) 0.1 f c l = 15 pf input output 50% 1.5 v 5 v v ol t phl t plh c l is approximately 15 pf which includes probe and stray wiring capacitance. *3 test circuit for common mode transient immunity i f r l = 4.1 k? v o (monitor) v cc = 5 v 0.1 f v cm 90% 10% 1.5 kv 0 v 5 v 2 v 0.8 v v ol v cm v o (i f = 0 ma) v o (i f = 16 ma) t r t f usage cautions 1. this product is weak for static el ectricity by designed with high-speed integr ated circuit so protect against static electricity when handling. 2. by-pass capacitor of 0.1 f is used between v cc and gnd near device. also, ens ure that the distance between the leads of the photocoupler and c apacitor is no more than 10 mm. 3. avoid storage at a high te mperature and high humidity. data sheet pn10260ej06v0ds 6 PS8101 typical characteristics (t a = 25c, unless otherwise specified) 50 30 20 10 0 40 25 50 75 100 ambient temperature t a ( c) diode power dissipation p d (mw) diode power dissipation vs. ambient temperature 120 100 60 20 0 80 40 25 50 75 100 ambient temperature t a ( c) detector power dissipation p c (mw) detector power dissipation vs. ambient temperature 100 0.01 0.1 10 1 1.4 1.8 2.0 2.4 1.0 1.2 1.6 2.2 forward voltage v f (v) forward current i f (ma) forward current vs. forward voltage t a = +100 c +50 c +25 c 0 c ?25 c 1 000 1 0.1 100 10 50 100 ?25 0 25 75 ambient temperature t a ( c) high level output current i oh (na) high level output current vs. ambient temperature v cc = v o = 30 v v cc = v o = 5.5 v i f = 0 ma 80 20 0 40 60 70 50 10 30 0.5 5 10 50 1 forward current i f (ma) current transfer ratio vs. forward current current transfer ratio ctr ( % ) v cc = 4.5 v, v o = 0.4 v 1.6 0.0 1.2 0.4 1.4 1.0 0.8 0.6 0.2 0 50 100 ?50 ?25 25 75 ambient temperature t a ( c) normalized current transfer raio ctr normalized current transfer ratio vs. ambient temperature normalized to 1.0 at t a = 25 c, i f = 16 ma, v cc = 4.5 v, v o = 0.4 v remark the graphs indicate nominal characteristics. data sheet pn10260ej06v0ds 7 PS8101 10 4 0 8 6 2 4 8 18 20 16 2 6 10 12 14 output voltage v o (v) output current i o (ma) output current vs. output voltage 20 ma 15 ma 10 ma 5 ma i f = 25 ma 6 5 4 2 0 3 1 12 16 20 48 26 10 14 18 forward current i f (ma) output voltage v o (v) output voltage vs. forward current r l = 2.2 k? 5.6 k? 3.0 0 1.0 2.0 10 15 25 5 20 forward current i f (ma) propagation delay time vs. forward current propagation delay time t phl , t plh ( s) v cc = 5 v, r l = 2.2 k? t phl t plh 10 1 0.1 10 k 100 k 1 k load resistance r l (?) propagation delay time vs. load resistance propagation delay time t phl , t plh ( s) v cc = 5 v, i f = 16 ma t plh t phl 5 4 2 0 3 1 ?50 0 50 100 ?25 75 25 ambient temperature t a (c) normalized propagation delay time vs. ambient temperature normalized propagation delay time t phl , t plh normalized to 1.0 at t a = 25c, i f = 16 ma, v cc = 5 v, r l = 2.2 k? t plh t phl remark t he graphs indicate nominal characteristics. data sheet pn10260ej06v0ds 8 PS8101 taping specifications (unit: mm) outline and dimensions (tape) taping direction outline and dimensions (reel) packing: 2 500 pcs/reel 2.00.5 r 1.0 13.00.2 21.00.8 3302.0 1001.0 2.00.5 11.9 to 15.4 outer edge of flange 17.51.0 13.51.0 13.00.2 PS8101-f3 PS8101-f4 1.550.1 2.00.05 4.00.1 1.750.1 3.90.1 3.45 max. 7.40.1 0.3 0.05 8.00.1 1.5 +0.1 ?0 5.50.1 12.00.2 3.00.1 data sheet pn10260ej06v0ds 9 PS8101 recommended mount pad dimensions (unit: mm) 1.45 0.8 1.27 5.5 data sheet pn10260ej06v0ds 10 PS8101 notes on handling 1. recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 260 c or below (package surface temperature) ? time of peak reflow temperature 10 seconds or less ? time of temperature higher than 220 c 60 seconds or less ? time to preheat temperature from 120 to 180 c 120 30 s ? number of reflows three ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) 12030 s (preheating) 220c 180c package surface temperature t (c) time (s) recommended temperature profile of infrared reflow (heating) to 10 s to 60 s 260c max. 120c (2) wav e soldering ? temperature 260 c or below (molten solder temperature) ? time 10 seconds or less ? preheating conditions 120 c or below (package surface temperature) ? number of times one (allowed to be dipped in solder including plastic mold portion.) ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (3) soldering by soldering iron ? peak temperature (l ead part temperature) 350 c or below ? time (each pins) 3 seconds or less ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (a) soldering of leads should be made at the poi nt 1.5 to 2.0 mm from the root of the lead (b) please be sure that the temperatur e of the package woul d not be heated over 100 c data sheet pn10260ej06v0ds 11 PS8101 (4) cautions ? f luxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. cautions regarding noise be aware that when voltage is applied suddenly between the photocoupler ?s input and output or between v cc and gnd at startup, the output transistor may enter the on state, even if t he voltage is within the absolute maximum ratings. data sheet pn10260ej06v0ds 12 PS8101 specification of vde marks license document parameter sy mbol speck unit climatic test class (iec 60068-1/din en 60068-1) 55/100/21 dielectric strength maximum operating isolation voltage test voltage (partial discharge test, procedure a for type test and random test) u pr = 1.5 u iorm , p d < 5 pc u iorm u pr 707 1 061 v peak v peak test voltage (partial discharge te st, procedure b for all devices) u pr = 1.875 u iorm , p d < 5 pc u pr 1 326 v peak highest permissible overvoltage u tr 6 000 v peak degree of pollution (din en 60664-1 vde0110 part 1) 2 comparative tracking index (iec 60112/din en 60112 (vde 0303 part 11)) cti 175 material group (din en 60664-1 vde0110 part 1) iii a storage temperature range t stg ?55 to +125 c operating temperature range t a ?55 to +100 c isolation resistance, minimum value v io = 500 v dc at t a = 25c v io = 500 v dc at t a max. at least 100c ris min. ris min. 10 12 10 11 ? ? safety maximum ratings (maximum permi ssible in case of fault, see thermal derating curve) package temperature current (input current i f , psi = 0) power (output or total power dissipation) isolation resistance v io = 500 v dc at t a = tsi tsi isi psi ris min. 150 200 300 10 9 c ma mw ? PS8101 caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinances when disposi ng of the product. if there are no applicable laws and/or ordinances, dispose of the product as recommended below . 1. commission a disposal company able to (wit h a license to) collect, transport and dispose of materials that contain arsenic and other such industrial w a ste materials. 2. exclude the product from general industria l w a ste and household garbage, and ensure that the product is controlled (as industrial w aste subjec t to special control) up until final disposal. ? do not burn, destroy , cut, crush, or chemically dissolve the product. ? do not lick the product or in any way allow it to enter the mouth. notice 1. descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. california eastern laboratories and renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. california eastern laboratories has used reasonable care in preparing the information included in this document, but california eastern laboratories does not warrant that such information is error free. california eastern laboratories and renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 3. california eastern laboratories and renesas electronics do not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of renesas electronics products or technical information described in this document. no license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of california eastern laboratories or renesas electronics or others. 4. y ou should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part. california eastern laboratories and renesas electronics assume no responsibility for any losses incurred by you or third parties arising from such alteration, modifcation, copy or otherwise misappropriation of renesas electronics product. 5. renesas electronics products are classifed according to the following two quality grades: standard and high quality. the recommended applications for each renesas electronics product depends on the product s quality grade, as indicated below. standard: computers; offce equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. high quality: transportation equipment (automobiles, trains, ships, etc.); traffc control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. renesas electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artifcial life support devices or systems, sur gical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). you must check the quality grade of each renesas electronics product before using it in a particular application. you may not use any renesas electronics product for any application for which it is not intended. california eastern laboratories and renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for which the product is not intended by california eastern laboratories or renesas electronics. 6. y ou should use the renesas electronics products described in this document within the range specifed by california eastern laboratories, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. california eastern laboratories shall have no liability for malfunctions or damages arising out of the use of renesas electronics products beyond such specifed ranges. 7. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have specifc characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. further, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physical injury , and injury or damage caused by fre in the event of the failure of a renesas electronics product, such as safety design for hardware and software including but not limited to redundancy , fre control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. because the evaluation of microcomputer software alone is very diffcult, please evaluate the safety of the fnal products or systems manufactured by you. 8. please contact a california eastern laboratories sales offce for details as to environmental matters such as the environmental compatibility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the eu rohs directive. california eastern laboratories and renesas electronics assume no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. renesas electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. you should not use renesas electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. when exporting the renesas electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. it is the responsibility of the buyer or distributor of california eastern laboratories, who distributes, disposes of, or otherwise places the renesas electronics product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, california eastern laboratories and renesas electronics assume no responsibility for any losses incurred by you or third parties as a result of unauthorized use of renesas electronics products. 1 1. this document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of california eastern laboratories. 12. please contact a california eastern laboratories sales offce if you have any questions regarding the information contained in this document or renesas electronics products, or if you have any other inquiries. note 1: renesas electronics as used in this document means renesas electronics corporation and also includes its majority-owned subsidiaries. note 2: renesas electronics product(s) means any product developed or manufactured by or for renesas electronics. note 3: products and product information are subject to change without notice. cel headquarters ? 4590 patrick henry drive, santa clara, ca 95054 ? phone (408) 919-2500 ? www.cel.com for a complete list of sales offces, representatives and distributors, please visit our website: www.cel.com/contactus |
Price & Availability of PS8101
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |